• 2-Dimensional model of the resonant tunnelling through an ideal double barrier structure
• A direct beam and diffuse solar irradiance forecasting model based on a meteorological model
• A literature-based study of the barriers to and advantages of small-scale manufacture of charge controllers and lamps for PV systems in developing countries
• A Modelling Tool for Estimating Diffuse Solar Radiation with Multiple Predictors
• A Study of Heat Flow Reversal in Masonry Walls Subjected to Diurnal Temperature Swings
• A Time for Real Building Performance Measurement
• A two ends fed direct current (DC) Ring Distributor for Light Emitting Diodes'application in Architectural lighting system
• A Wind Resource Assessment for a Rooftop Wind System
• ABSA - Imroving Residential Building Thermal Performance across Australia and New Zealand
• Ammonia-based Solar Energy Storage : Receiver Design for Dish Concentrators
• An ADRA Research Project to overcome Barriers to Renewable Energy in Rural Indonesia by Community Capacity Building using the I3A Framework
• An analysis on free convection flow in building ventilation
• An energy efficient protocol to compensate net evaporation and net precipitation in open-pond microalgal massive cultures and obtain maximal steady-state productivities
• An integrated solar heat pump system for cooling, water heating and drying
• Analysis of a Solar Assisted Liquid Desiccant Air Conditioning System for Hot and Humid Climate
• Blade Element Analysis of Variable Pitch Air Turbines for Oscillating Water Column Wave Energy Systems
• CFD Analysis of the Performance of Blade Cascades for Air Turbines in Oscillating Water Column Wave Energy Conversion Systems
• Challenges in Establishing a PV Manufacturing Facility in Australia : The Story of Spark Solar Australia
• Challenges in Integrating Renewable Energy into Electricity Industries
• Characterisation of corona-charged oxide-passivated silicon
• Characterisation of Mirror Surfaces of the SG4 “Big Dish” at The Australian National University
• Characteristics of Mantle Heat Exchangers with Two-pass Flow Arrangement
• Community Powerhouse: A Rural Electrification Model for Vanuatu
• Comparison of Test Results of Various Available Nepalese Timbers for Small Wind Applications
• Cultural Memes and their Inbhibitory Impact upon Energy Policy Change
• Degradation of oxide-passivated n-type silicon at room temperature
• Designing A Coherent PV Strategy For Australia
• Developing a market-based, efficiency-oriented incentive policy framework for sustainable energies in China--a case study of PV systems
• Double Skin Facades: More is Less?
• Ecological Footprint of Sydney and Canberra City in Residential Area
• Economical analysis of grid-connected solar photovoltaic systems
• Education opportunities to underpin renewable energy expansion
• EER Disclosure Non-Compliance in the ACT Rental Market
• Energy output as a performance metric for organic photovoltaics
• Ersatz Future Weather Data for Energy Engineering
• Examples of community-scale PV installation in urban area
• Experimental Performance of Water Cooled Building Integrated Photovoltaic/Thermal Solar Collectors
• Fabrication and Characterisation of Ge Nanocrystals in a Dielectric Matrix
• Fabrication of Thermoelectric Thin Films with High Dimensionless Figure of Merit Prepared by Pulsed Laser Deposition
• Facilitating the integration of distributed energy resources into the Australian National Electricity Market - the challenge of retail market design
• Fallacies about Greenhouse Solutions
• GIS as a tool for solar urban planning
• Hope for the Future
• Hydrogen Combustion and Thermally Activated Chillers as a Sustainable Water-Energy System for Industrial Establishment in SE Queensland
• HyLink - a renewable distributed energy application for hydrogen
• Implementation of measures of sustainable building design in a school of architecture
• Improved Wind Gust Stability for Wind Diesel Generator Systems
• Improving Rural Isolated Diesel Powered Electric Utility Services by Hybrid Solar and Wind Energy System
• Improving the Energy Efficiency of Manufactured Lightweight Housing: Integrating Phase-change Material with passive Solar Design
• Influences on residential uptake of distributed generation and energy efficiency
• Innovative PV Hybrid System concept based on open source components communication
• Investigation of Energy Selective Contacts for Hot Carrier Solar Cell
• Is there free heat in the roof spaces of New Zealand houses? Mechanical ventilation systems and heat transfer
• Key Issues & Future Challenges for PV in Cities - Deliverables from the IEA PVPS Task 10 Urban PV & EU PV-Upscale Programs
• Laboratory testing of Solar Powered High Head Water Pumps
• Large Deformation Plate Bending with Application to Solar Collectors
• Local Government in a Climate Constrained Future
• Local Market of Solar water Heaters in Taiwan: Review and Perspectives
• Mainstreaming solar hot water
• Material Degradation and Performance Mapping
• Mathematical modeling for sandwich greenhouse with water-air collector on rubber sheet drying application
• Maximum Power Extraction from Partially Shaded PV Arrays
• Measurement of Natural Convection Heat Transfer in an Attic Shaped Enclosure
• Modeling of quantum dot superlattices for hot carrier cell absorbers
• Monitoring and Evaluation of PV Programs in Rural Areas in the Asia-Pacific Region
• Mounting Photovoltaics on Evaporative Air Conditioners – A Green Trojan Horse
• New possibilities for thin-films in building integrated PV
• New type of solar water heater
• Nuclear energy scenario of Asian developing countries
• Office Design and Productivity
• Optimisation of orientation of Photovoltaic cells to match electricity demand
• Optimising Energy Use in a Domestic Pool System
• Performance Assessment of Indirect Evaporative Cooling Air-conditioning System, Installed at the University of Technology Sydney
• Performance of a Solar Beam Splitter Manufactured by Ion Assisted Deposition
• Photovoltaic (PV) technologies in Fiji and Kiribati: An assessment of their impact on sustainable development of Rural and Remote Communities using a complementary and interrelated perspective
• Policies to Promote an Urban Car
• Potential Contribution of Solar Energy Towards Electrical Peak Demand in South-East Queensland
• Potential of Reducing Cooling Loads through Façade and Glass Types in Medium and High-rise Office Buildings
• Predicting the performance of a light channeling daylighting system
• PV Lighting Systems in Nepal
• PV-thermal hybrid receivers
• Reciprocating balloon engines with outputs in the 50 kW to 0.5 MW range
• Reflections on a Tasmanian Solar Passive House
• Renewable Energy Evaluation on Process for Remote Cattle Stations
• Renewable Energy Solutions for Large Pastoral Stations in North Australia
• Renewable energy technologies manufacturing facilities in Algeria
• Renewable Heat:: European policy and technology development
• Resource analysis for development projects
• Resourcing a low carbon future
• Results from a Simple Infrared Cloud detector
• Retrofitting for Renewability
• Reward the Frugal to reduce Emissions
• River power in the jungle
• Sensitivity Analysis for Predicting Heating Loads and Overheating in a Passive Solar House Model
• Solar Steam Cooker
• Solar Systems in the Central and Tanami Deserts – Community, Commercial and Technical Learnings
• Solar Technology Demonstration Facility
• SolarGas One - Solar fuel for a fossil-based nation
• Spherical and asymmetric mirror panels for paraboloidal concentrators
• Study on chemical kinetics of waste paper and its pyrolysis
• Sustainability through Bioclimatic Building Design in North-East India
• Tandem Photoelectrolysis Cells for Direct Water Splitting
• Technial Analysis of a Small-Scale Photovoltaic System in Tulin, Humla, Nepal
• Technical and Economic Feasibility of Stand-alone Solar Photovoltaic Generator; Application to Ikeja-Nigeria
• Techniques for rapid optical assessment of solar array heliostats
• The I3A Framework - Enhancing the Sustainability of Off-grid Photovoltaic Energy Service Delivery in Indonesia
• The IP Landscape for Photovoltaics
• The value to the electricity market and the electricity network of photovoltaic generation
• The Virtual Power Station – Reliably Meeting Electricity Network Demands with Photovoltaics
• Theoretical Basis of Holistic Community Development and the Role of Renewable Energy Technologies
• Transient analysis of Dish type solar thermal system using numerical method
• Use of Corrugated Metal Panels as Transpired Solar Collectors
• Wind power in Fiji: (almost) too little or too much
• “Cool” paints for large energy savings

114 abstracts