Poster Session

Wednesday, 26 November 2008 18:00 - 19:30, Parkside Foyer

Expanded Renewables target what it means for new investment
  • Ric Brazzale, Green Energy Markets, Australia
PV Rebate Program and Means Testing
  • Ric Brazzale, Green Energy Markets, Australia
Energy Efficiency Targets - emerging opportunity for sustainable energy companies
  • Ric Brazzale, Green Energy Markets, Australia
Green Buildings’ priorities in Riyadh, Saudi Arabia
  • Mr Mohammad Gh Kotbi, Faculty of the built environment, University of New Sauth Wales, Sydney, Australia, Saudi Arabia
Innovative Solar Ejector Air Conditioners and Chillers
  • Dr Volodymyr Petrenko, National Taiwan University, Taiwan
Design Approach for Photovoltaic Power Stations - considering demand side requirements, PV and energy cost
  • Fouad Kamel Abdalla, University of Southern Queensland, Australia
Fusing of Photovoltaic Arrays
  • Martina Calais, School of Engineering and Energy, Murdoch University, Australia
On Solar Powered Cottage Industry in Ikeja-Nigeria
  • Michael A Chendo, Department of Physics, University of Lagos., Nigeria
Performance and prospects of an ultra-light-weight PV concentrator in water
  • Mr Philip M Connor, Sunengy Pty Ltd, Australia
The Development of a Long Range Battery Electric Vehicle and its Performance in the 2007 World Solar Challenge
  • Mike D Duke, the university of waikato, New Zealand
Photovoltaic window panel with high transparency
  • Ian R Edmonds, Solartran Pty Ltd, Australia
The influence of Tolidine as a plasticizer on the performance of dye-sensitized solar cell involving polymer electrolyte PVDF/ I/I3 system
  • S Ganesan, University of Madras, India
Study on Dynamic Characteristics of MPPT in Rapid Irradiance Variation
  • Yasuro Haseo, Kanagawa Institute of Technology, Japan
Very Large Scale PV Systems on Desert: Potential and Feasibility
  • Keiichi Komoto, Mizuho Information & research Institute, Japan
Photovoltaic power system uptake in the commercial building sector
  • Tim Lam, UNSW, Australia
Application of See-through solar cells to a growth plant using supplemental blue light during morning twilight
  • Professor Toshiro Matsumoto, Dept. of Intelligent Mechanics, The School of Biology-oriented Science and Technology, Kinki University, Japan
Control Issues in PV Hybrid Mini-Grids
  • Wolfgang Meike, Novolta Pty Ltd, Australia
IEA PVPS Task 11 - PV Hybrid Mini-Grids - an Overview
  • Wolfgang Meike, Novolta Pty Ltd, Australia
Solid-state nanocrystalline dye-sensitized solar cell using 2-mercapto benzimidazole doped poly (ethylene oxide) as a new polymer electrolyte
  • B Muthuraaman, Department of Energy, University of Madras, Guindy Campus, India
Proper Timing to Measure Internal Impeadance of Ni-MH Battery
  • Shogo Nishikawa, Nihon University, Japan
Taking Australian Renewables to the World – Learnings from Experience
  • Barry Hendy, Solar Systems, Australia
The Study of PV Electricity in Market Building Design in Jakarta
  • Eka Sediadi, Architecture Department Faculty of Civil Engineering and Planning Trisakti University Jakarta, Indonesia
Investigation of Quantum Confinement Effects on Tin Quantum Dot Materials for Photovoltaic Applications
  • Mr Yong Heng So, University of New South Wales, Australia
Safety Issues, Arcing and Fusing in PV Arrays
  • Edward D Spooner, The University of NSW, Australia
The Feed in Tariff scheme in the Italian case. An attempt for removing barriers for PV architectural integration and for energy building efficiency
  • Francesca Tilli, GSE, Italy
Silicon Solar Cells for Tandem Very High Efficiency Solar Cells (VHESC)
  • Ngwe Soe Zin, Australian National University, Australia
Parametric analysis of a solar water-air heater
  • Dr Ladda Tanwanichkul, Khonkaen University, Thailand
Outdoor Conditions and its Effects on the Performance of the Compound Parabolic Concentrator System
  • Khaled Elsadeg Albahloul, 7th of October University, Libya
  • Dr Abdullatif Salim Zgalei, Alfath University, Libya
  • Dr Omar Mohamed Mahgjup, 7th of October University, Libya
Experimental results for a heat engine powered by evaporative cooling of hot air at reduced pressure
  • Noel G Barton, Sunoba Pty Ltd, Australia
Studies of a Top-heat-type Thermosyphon
  • Mr Tomoya Ishizuka, Kanagawa Institute of Technology, Atsugi www.kait.jp, Japan
Solar Radiation Measurement by Using Calorimetric Method
  • Woranuch Jangsawang, Phranakhon Rajabhat University, Thailand
Analysis of Heat Transfer Characteristics of a Methane Steam Reforming Reaction in a High Temperature Solar Chemical Reactor
  • KyungMun Kang, Department of Mechanical Engineering, Graduate School, Inha University, Korea
  • Mr Johan S Ko, Department of Mechanical Engineering, Graduate School, Inha University, Korea
  • Professor TaeBeom Seo, Department of Mechanical Engineering, Inha University, Korea
Studying the feasibility of a compound parabolic concentrator for solar cooling
  • Khaled elsadeg Khaled, 7th October University, Libya
  • Prof Abdullatif Salim Zgalei, Al-fateh University, Libya
  • Prof Omar Mohamed Mahgjup, 7th October University, Libya
Green technology for air conditioning in tropical and sub-tropical countries
  • Mr Pushpendra Singh, Maulana Azad National Institute of Technology, Bhopal, India, India
Opportunities for process heat from medium temperature collectors
  • Wesley Stein, CSIRO, Australia
Testing Performance of The First Outdoor Thermosyphon With A Heat Source Near The Top and Heat Sink at The Bottom
  • Erkata Yandri, Kanagawa Institute of Technology, Atsugi - Japan, Japan
Water desalination of salt water by hydrate formation using solar thermal power generation
  • Hiroyuki Yoshioka, Tokyo Metropolitan University, Japan
The Thermal Characteristic Analysis Based On the Solar Wall and Phase Change Floor Room
  • Shui Yu, China
  • PhD Guohui Feng, Municipal and Environmental Engineering Faculty, Shenyang Jianzhu University, Shenyang, China
Measuring Sustainability for the Built Environment at Urban Scale: initial study for four large-sized Chinese cities
  • Mr Wu Deng, Faculty of Built Environment, University of New South Wales, Australia
Lessons learned from a passive solar House in Rosevears, Tasmania
  • Mr Mark A Dewsbury, Australia
Energy performance simulation of Australian office buildings: a field validation study
  • Aileen M Egan, Australian National University, Australia
An Investigation of the Impact of Balcony on the Indoor Air Flow of Single-sided Naturally Ventilated Apartment
  • Mohd Farid Mohamed, University Of New South Wales, Australia
Green building rating schemefor Singapore: an overview
  • Kok Wee Ng, FBE, UNSW, Australia
  • Prof Deo Prasad, Australia
  • Prof Goran Runeson, Australia
Mass Culturing of Microalgae for Biofuels for Australia: A GIS Assessment of Climatological, Energetic and Terrain Feasibility
  • Mr Mishka Talent, Department of Engineering and Information Technology, ANU, Australia
Measurement of the characteristics of platinum nanoparticle deposited TiO2 hollow particles
  • Hideo Aikawa, Osaka Prefecture University, Japan
Renewable Community Energy Program in Bangladesh
  • Solar Baidya N/A Haragobinda Baidya, Minority Self Empowerment Foundation (MSEF), Bangladesh
The effect of variability in wave heights on the provision of dependable ‘green’ power: A statistical analysis of North American waters using the gamma distribution
  • Mark Savenkov, student, Australia
World Energy: Supply, Security, Sustainability, and the Environment
  • Ahmad Zahedi, James Cook University, Australia
Optimization of energy efficiency with the solar control devices in windows for hot climates
  • Silvia Arias, University of Guadalajara, Mexico, Mexico
Retrofitting Double Glazing to Timber Framed Windows in Tasmania
  • Mark Dewsbury, School of Architecture, University of Tasmania, Australia
Design of a low cost solar maximum power point tracker using the ripple correlation control technique
  • Mr Mark Savenkov, RMIT University (student), Australia
  • Mr Rowan Gobey, RMIT University (student), Australia
The Study of Extension Factors Role in Renewable Energies and their Priorities
  • Vahid Alimirzaee, Iran
Towards A Framework For A Green Building Rating Tool For Residential Properties In Malaysia
  • Muhammad Azzam Ismail, Faculty Of The Built Environment, University Of New South Wales, Australia
Correlation of global radiation with some meteorological parameters for Jeddah Saudi Arabia
  • Abdullrahman H Maghrabi, King Abdulaziz City For Science and Technology, Saudi Arabia
Technical Evaluation of the AusAid Funded Eastern Indonesia PV-Diesel Hybrid Project In Sulawesi Island
  • Dr Arya Rezavidi, Agency for the Asessment and Application Of Technology, Indonesia
Solar lighting for Pacific Island countries
  • Dr Tony Weir, University of the South Pacific, Fiji
Resource and load assessment for a hybrid renewable energy system in Mesuji – Tulang Bawang district, Sumatra, Indonesia
  • Jonathan Whale, Murdoch University, Australia
Survey of community support for a renewable energy system implementation program in Sumatra, Indonesia
  • Jonathan Whale, Murdoch University, Australia
Design, simulation and integration of power grid stations
  • Mr N Bhushan, Sir M.VISVESVARAYA INSTITUTE OF TECHNOLOGY, India
Augmentation Of Weak Grid Connected Networks With An Ultra-Cheap Grid Connected Inverter
  • Pramod Ghimire, University Of Canterbury, New Zealand
A Study on the Development of Photovoltaic Grid Connected System in Indonesia
  • Andhika Prastawa, Agency for the Asessment and Application Of Technology, Indonesia
Australasian Climate Data Bank Projects
  • Trevor R Lee, Energy Partners, Australia
Australasian Solar Radiation Data – Proposal for Enhanced Knowledge Dissemination
  • Trevor R Lee, Energy Partners, Australia
Beyond TMY: Climate Data for Specific Applications
  • Trevor R Lee, Energy Partners, Australia
Market-based mechanisms to drive energy efficiency
  • Robert J Passey, Centre for Energy and Environmental Markets, UNSW, Australia
Investing in Solar Industry from an Ethical Fund's Perspective
  • Frank Zhu, Australian Ethical Investment Ltd, Australia